What goes in to installing the VLS?

It's pretty simple to install your VLS. Here's the steps for a 3000GT / Stealth / GTO.

1. Remove the sideskirt and fender.
2. Unbolt the old door hinges, take the door down.
3. Unhinge the door wire harness from the door.
4. Cut the wires, and use the INCLUDED wire entensions to entend your wires.
5. Take off the old hinges, bolt the VLS to the door.
6. Put the door back up to the car, put your stock bolts back in the stock holes (NO welding, drilling, and rolling fenders like other kits!)
7. Reconnect your wires.
8. Make sure it's aligned, then tighten down the bolts.
9. Put your fender and side skirt back on.

Your done!